Subaru WRX and STi 2015-21
Front Canards Kit

Last updated: 16 June 2025

Thank you for purchasing our Front Canards Kit! Follow these simple steps for proper installation.

If you have not purchased it yet, you can find it here.
If you ever have any questions, please do not hesitate to contact us here or send an email to us directly to contact@gotpivo.com.

What’s included

  • (2) Front Left Canards with 3M Double-Sided Tape Pre-Applied
  • (2) Front Right Canards with 3M Double-Sided Tape Pre-Applied
  • (1) Front Left Template (optional)
  • (1) Front Right Template (optional)

You can also download the template here.

    Installation Steps

    1. Surface Preparation:

    • Thoroughly clean the installation area to remove all dirt, oil, and debris.
    • For best adhesion, wipe the area with isopropyl alcohol and let it dry completely.

    2. Positioning:

    • The canards can be positioned wherever you prefer. The provided paper templates serve as a guide.
    • Cut out the templates to help visualize placement.
    • Using masking tape, align the template so that the long edge runs along the edge of the bumper cover. The corner of the template should be positioned at the point where the bumper cover meets the headlight, as shown in the picture below.

    3. Adhesive Installation:

    • Peel off the backing from the 3M double-sided tape.
    • Carefully press the canards onto the clean, dry surface, applying firm, even pressure.
    • Allow the adhesive to cure for several hours (ideally 24 hours) before exposing to moisture or high speeds.

      4. Optional Hardware Installation:

      • Pilot holes are provided underneath the 3M tape if you prefer to use hardware.
      • Hardware is not included. We recommend using stainless steel hardware for corrosion resistance.
      • If using hardware, drill carefully and securely fasten the canards.

      Additional Notes:

      • Proper surface preparation is critical for long-lasting adhesion.
      • Canard placement is fully customizable based on your style preference.
      • Templates are provided as a positioning aid and are optional to use.

      Disclaimer:
      The user assumes all responsibility for the proper installation and use of this product. Got Pivo LLC is not liable for any damage to property, vehicle, or personal injury that may occur during or after installation and use. The user is responsible for ensuring that the installation and use of this product comply with all local, state, and federal laws. This product may not be legal for use on public roads in all areas and is intended for off-road or show use only. Installation of this product may void the vehicle manufacturer’s warranty as well as other third-party warranties. By proceeding with installation, the user acknowledges and agrees to these terms.

      Shopping Cart